FIRE DOOR - DROP TESTING AND CERTIFICATION AND ANNUAL INSPECTION SOLUTION HOUSTON, TX.
Fire door is normally an internal door has compressed fire proof material (rock-wool) between the door's steel plates. Protects an escape route through a building in a fire situation.Compartmentalizes a fire, to stop flames and smoke spreading from one section of the building to another. Fire door is a key component to the compartmentalization of a building to stop the spread of deadly fire, smoke and toxic fumes.The inspection is to identify and correct issues so fire doors will perform, up to their respective standards, in the event of fire. The tests and corrections are to be documented as proof to the results. Fire doors that operate efficiently help save lives and protect your property when an emergency incident occurs.
Damaged or defective fire doors lead to tragic losses and increased legal liability. Fire doors are doors that close automatically during a fire in order to restrict airflow that feeds the fire. Fire Doors are designed and specified to hold off the fire for a rated period of time in accordance with the location and purpose of the wall in which the opening exists. They protect property and people. If there is a fire in one of your buildings, fire doors can minimize damage and most importantly fire doors can slow the progress of the fire giving people more time to escape. National Fire Protection Association [N.F.P.A] 80 standards require building owners and managers to have their rolling and sliding fire doors inspected and tested annually, and maintain written documentation of such inspections.
Section 15-2.4.3 reads: "All horizontal or vertical sliding and rolling fire doors shall be inspected and tested annually to check for proper operation and full closure. Resetting of the release mechanism shall be done in accordance with the manufacturer's instructions. A written record shall be maintained and be made available to the authority having jurisdiction." N.F.P.A 80 covers basic requirements for maintenance of fire doors (opening protective). Opening protective include: Horizontally sliding fire doors, Vertically- sliding fire door, Rolling - steel fire doors, Fire - shutters and counter - Service fire doors Insurance companies often enforce [N.F.P.A] 80 to reduce their risk and yours. Fire is real and the risk is real.
Properly working fire doors can save lives and property. Reduce your risk by ensuring your doors are properly applied, installed and tested. We have spent countless hours on training regarding proper installation and drop-testing. Over 90% of doors we test that we did not install fail to meet the guidelines. Unfortunately, the door industry has failed to properly train the majority of installers and service technicians. We offer a no charge visit to do a visual inspection, performed by our service rep. Determine if your doors are serviceable and properly installed. Once your doors are brought to a compliant standard, you will be supplied with proper signed documentation through D.A.S.M.A and we can establish an annual drop test program Fire rated door service, drop testing and certification Houston.
Where are fire doors required?
When you run a commercial or industrial establishment, you need to take fire safety very seriously. If you don't have an efficient fire safety system in place, you risk the lives and health of your employees and business associates. Fire doors stop the spread of fire and smoke from one area to another. They can act as obstacles and give you more time to escape the property because they will delay the progress of fire; you still need to exit the property and get as far away from it as you can. Fire doors can slow down, but can't entirely stop the progress of the fire. Sometimes the isolation is enough for fire personnel to extinguish the flames, but you shouldn't take the chance.
Fire rated steel doors play a vital role in keeping people and property safe and minimizing property damage during a fire. Fire rated doors are required to be self - closing and positive latching. Frame and Hardware must also carry the appropriate fire label.whether you are looking for custom commercial steel doors, bullet proof doors, fire rated doors, STC doors, or a variety of types of hollow metal doors, stainless steel doors, hollow metal door frames or steel door frames for your facility, please call us .
Fire/Smoke doors be perfectly functional at all times. They should open and close well and have a tight seal that won't allow flames or smoke to pass. If the door doesn't form a good seal or doesn't open or close well, you need to call in a repair contractor to address the problem immediately. If you defer getting the door repaired, the inspector will notice it during the fire safety check, and that would be a black mark against you.
Entrance door that looks cheap, is discolored or faded, or shakes the wall when it closes, can create a lasting negative impression that will remain with a customer long after they've left your establishment. We understand that first impressions can be crucial to the success of your business. Our heavy - duty reinforced steel doors are also available in stainless steel.
Our door specialists can properly guide you through your door purchase process to ensure that you receive the highest quality door with superior functionality for your business. Labeled fire doors control the spread of fire and smoke for up to 3 hours.
Metal fire doors are an economical alternative to wood fire doors, when more than a 20-minute rating is required. Steel is the sole door material to deliver a 3-hour fire rating. Door and Dock solutions carries all of your commercial hardware needs including door locks, door Closers, Auto Closers, Panic Bars, Panic Alarms, Electric strikes, Key Pads, commercial doors and frames.
Full Flush door panels and frames are constructed of galvanized led steel. Galvanizing is a thermal process that provides improved paint adhesion, prevents rust and has a higher weldability than galvanized steel. We can also build to fit your specific needs in custom door sizes and configurations of hardware. We exclusively supply doors that are designed to meet and exceed industry standards for metal building entry doors.
The designated period of time represents how long the door will hold up against a fire. Our doors are tested and meet the requirements of UL 10B, UL 10C, UPC 7-2, or ASTM E-152, testing methods that are commonly used when testing the durability of a fire rated door. Fire rated doors should be installed and maintained in accordance to NFPA 80.
The quality, longevity, weather tightness, and ease of operation of doors are especially important because they are potentially the only moving part of your building. Whether you're looking for a door on a budget, or a top of the line door, our wide variety of door options will meet all of your requirements!
Full Flush Steel door:
The door panel is constructed by placing both halves of the door panel together by interlocking channel system. The internal core of the door is constructed with steel stiff fasteners that extend the entire height of the door panel and are adhered to both sides of the door panel.
Knock Down or Welded Steel frames:
The knock down/ Welded frame option is a great choice for existing construction where a pre- existing opening is already prepared for a door that reduce cost to install. The three separate pieces of the frame make it easy to install one piece at a time to ensure an exact fit and secure holding ability for the specific wall construction.
Advantage of fire rated steel doors
- Self- closing and positive latching.
- Polystyrene or Honeycomb core
- Up to 3-hour label (ITS/WHI)
- TPE "U" concealed sweep to limit damage, by retarding the spread of fire for their designated period of time
- Building code requires the use of fire rated doors in certain applications
- By slowing the spread of fire, fire rated doors provide the buildings' occupants with safe means of escape
- All types of hardware available from locks, hinges to panic bars and door exit alarms.
- Card access systems, electric strikes, key pads and more
- 20, 45, 60, 90 Minute or 3-hour Label
- Available in single or double panel configuration
- Our doors are hung by heavy gauge steel hinges
- Insulated Polystyrene core<
Fire door inspection:
Fire rated doors are an integral part of your building's overall fire protection system. An operating fire door, just like a properly operating fire damper, is a key component to the compartmentalization of a building to stop the spread of deadly fire, smoke and toxic fumes. If the fire door assembly isn't working properly, your facility is at risk.
Can existing fire doors be modified for new hardware?
Field modifications are limited by NFPA 80 to job site preparation for:
- Surface applied hardware;
- Function holes for mortise locks;
- Holes for labeled viewers;
- Protection plates; and
- A maximum 19-mm (¾-in.) wood and composite door undercutting.
Holes drilled in the field are limited to 25-mm (1-in.) diameter, with the exception of cylinder holes that can be any size. For other modifications not specifically addressed by NFPA 80, the listing agency may be contacted through the door/frame manufacturer to request permission to perform a specific modification in the field. Another option would be to transport the existing doors to an approved facility to modify them, attach new labels, and then reinstall the doors. Fire door assemblies can also be inspected and relabeled in the field by the listing agency, if acceptable, but this process can be very costly.
What is positive latching, and is it required for all fire doors?
Hardware on fire door assemblies has to have an active latch bolt to prevent the pressure caused by a fire from pushing the door open and allowing smoke and flames to spread. A spring latch found in a standard lockset or latch set is considered an active latch bolt; some fire door configurations require a specific 'latch throw'. A deadbolt is not an active latch bolt, because it can be held retracted. An electromagnetic lock does not provide a positive latch, because there is no latching mechanism and the locking is accomplished when the electromagnet bonds to the steel armature. Electric strikes used on fire doors must be fail-secure—that is, when power is cut, the latch is securely captured behind the strike keeper. A fail-safe electric strike could allow the door to become unlatched, so such strikes may not be used on fire doors.
How is fire exit hardware different from panic hardware?
When panic hardware is used on fire doors, it must be fire exit hardware, which bears labels for both panic and fire resistance. A door with fire exit hardware will also have an additional label, indicating it is equipped with fire exit hardware. Fire exit hardware does not incorporate a mechanical dogging feature—the means to hold the latch retracted using a key, thumb turn, or Allen wrench. For fire doors where a 'push/pull' condition is desired, fire exit hardware with electric latch retraction may be used, as long as the latch projects automatically upon fire alarm, to secure the door.
Why do fire doors fail?
Like all mechanical products fire doors need periodic inspection and maintenance. While there can be many reasons why doors fail, we see four common situations:
If the fire door is not used on a regular basis, people may not be aware, it is a fire door. Over time with little or no care paid to the door or the opening, the door will not close properly. We have seen in ignorance, the door rails are blocked by brooms, barrels, buckets and other items stored in the doorway preventing the door from closing.
So over time the guide rails may be painted or damaged or people put things in the doorway preventing the door from closing. The fire door opening is a traffic path and therefore the guide rails of the door a subject of related damage. Guide rails get bumped, bent, and knocked out of alignment by forklift, lift truck and carts during the course of a normal day. Please note that it is not possible to visually tell if the damage is severe enough to prevent proper functioning of the door.
Fire door assemblies are utilized to protect door openings and maintain the integrity of the fire barrier. Openings in walls have been traditionally classified by fire protection standards and building codes in accordance with the location and purpose of the wall in which the opening exists. (N.F.P. A – 252-B.2.1) Note that N.F.P. A 80 requires fire door inspections to be done by a qualified person done according to manufacturer's specifications. As part of our testing we will come out and perform our 17 Point inspection and actually drop test your door.
We will provide you with all of the documentation you need to be in compliance with State of TX code. If one of your doors fails the inspection or test, you will be given a quote on the spot for what it will take to bring the door back to proper functioning. Note that this is provided for reference only and should not be used to guide your testing procedures or practice.
Please go to the NFPA - 80 to get the current specification. Once your doors are brought to a compliant standard, you will be supplied with proper signed documentation through D.A.S.M.A and we can establish an annual drop test program. If you truly want to protect your employees and assets by ensuring your fire doors are compliant.
Are annual inspections of fire door assemblies required for all building types?
The 2007 edition of NFPA 80 (and all subsequent editions) require fire door assemblies be inspected each year by someone knowledgeable about the products. A list of inspection criteria is included in NFPA 80, and written documentation of the inspection must be kept for review.Fire door assemblies are required to be in good working order. Conducting an inspection and making the necessary repairs can mitigate the risk and liability of having fire doors that will not function properly in a fire. Inspecting newly installed fire door assemblies a requirement of the 2013 edition of NFPA 80 ensures the building owner has a code-compliant installation to begin with, or allows the deficiencies to be repaired during the warranty period. Our certified fire door inspection team can help you ensure that your fire doors are code compliant and are working properly and provide you inspection certification. We test and certify all types of fire doors like swinging, Vertically- sliding, Horizontally- sliding and Rolling fire doors.
- Experience: 20 plus years in the fire door industry
- Reliability: We built our business on honesty, integrity and the total commitment to customer satisfaction guaranteed
- Technical Knowledge: Our staff and technicians possess the most up to date systems to provide you with all the details necessary to make the services decision when purchasing fire door products or services
- Equipment: We have made extensive investments in the finest equipment and vehicles and factory trained our technicians to meet your needs in the safest and most productive manner
- Availability: In case an emergency, we are available 24/7 365 days weekend and holidays, call after hour Phone:  611 – 7703