Pedestrian Door Service

Pedestrian door repair and service Houston

Pedestrian door are the main entrances to most industrial and commercial buildings. It’s also called a man door, is the primary entrance into a facility for all people who work there. They can be located on the side or at the back of commercial, industrial, and institutional properties. Depending on the needs of your facility, a pedestrian door can be either hollow metal with manual operation or equipped with an automatic swing or slide system. Regardless of the model you choose, here’s a look at why you should always have pedestrian doors installed by a professional.


Pedestrian doors are used to provide convenient access for employees, guests, and delivery personnel. While the name may imply that these doors are only for pedestrians, they can also be used to facilitate other types of traffic. Some people call these doors man doors or automatic doors because they are operated manually or automatically. These doors are typically installed at the back of commercial, industrial, and institutional properties.

Man door services in Houston and Suburbs

Our technicians are highly skilled at installing all kinds of man doors, including glass storefront doors, hollow metal doors, and more. We're happy to offer the best Houston man door services to homeowners and businesses throughout the Houston area, including surrounding areas like Sugar Land, The Woodlands, Cypress, Katy, and more.

If you are looking to get man doors installed in Houston or nearby, look no further than the team at Door and Dock Solutions. We have helped countless clients get the access solutions they need, and we'd love to do the same for you in your community today. From man door installation to glass storefront door installation in Houston, our team is ready to help! Our expert staff is here to walk you through all of your options when it comes to your new man door. Don't wait another day! Call us today at [832] 232 – 9150.

Retail door Repair

Door and Dock Solutions knows that safety starts with proper planning and execution of repairs, installing or maintenance of doors in a retail environment. Our team is trained, certified, and experienced in the services we provide. Door and Dock Solutions is fully licensed, certified and insured. We also back up all our work with a 100% satisfaction guarantee.

Door and Dock Solutions can help you with any type of door. From Manual storefront doors, automatic sliding doors, swing doors, folding and revolving doors. We have the expertise to ensure your building is safe for everyone. Door and Dock Solutions can help you create a plan for safety and set clear expectations for the day-to-day operations of your business. Call Door and Dock Solutions today to schedule an appointment time to update your business' door safety!

We Repair and service entrance door operators

We repair all brands of entrance door operator systems. No matter what brand or model you have, we will be able to repair it quickly and effectively, so that you can get back to work as soon as possible.

We pride ourselves in delivering excellent customer service at the most reasonable price! Our experienced technicians will help you choose the right entrance and pedestrian door product for your needs. We also provide maintenance and repair services for all types of entrances and pedestrian doors in Texas

Door and Dock solutions provide technical solutions for any openings that need repair or that are not compliant with building and safety codes. We realize that doors are the first impression given to the world. They are what visitors see when entering your store or business.

24/7 Emergency service

Our expert door repair service technicians are completely licensed, bonded, and insured. We are experts at repairing existing aluminum storefront doors, hollow metal pedestrian doors, roll up doors, fire doors, etc. We are ready to walk you through the process of ordering completely new doors you need for your business. This includes important options like fire doors. We carry exactly what you need, and if you're not sure what's available, we are ready to walk you through the doors that fit best for your needs.

Our staff is here to help when you are looking to have a door put in at your business’s building. Whatever you’re thinking of, we can make it happen and make it a reality. The products that we use are durable, provide convenient and safe access, and are installed by certified professionals.

We also do the installation of walk-thru doors for offices, schools, churches and more. We can provide custom options for any kind of door you might need installed or repaired. No job is too small or too big for our team! Call 24 hours a day to get help from our reliable crews!

Why you should choose man door services in Houston and Suburbs from Door and Dock Solutions

We always use quality products, and we stand by them with a lifetime guarantee on all of their parts. If there’s ever an issue with your man door, we’ll fix it as soon as possible for free! Don’t settle for low-quality products or service, contact us today for help getting the doors that you need to increase safety, security, and accessibility at your place in Sugar Land.

Just as with any door, Man - doors need to be properly maintained and serviced on a regular basis. We will provide you with the right tips and tricks to keep your doors in good condition even when you aren't doing heavy duty work. The first thing we do is check for signs of wear and tear. We might need to replace the hinges or fix a damaged lock that no longer works properly. If we can't fix it, we may have to replace the entire unit entirely.

Our technicians will also inspect the frame and weather stripping for any damage that needs repairs. Damaged weather-stripping may cause water leaks or air penetration which would make your doors more difficult to open and close effectively. If you're looking for Man - door installation in Houston, you've come to the right place. Call us today at (832) 232-9150. You'll get a quick response from one of our helpful representatives who can help you get your project moving forward right away.

We have been in business since 1996 and have grown into a full-service company specializing in commercial and Industrial doors, Dock levelers, dock accessories, Automated gates, Access control etc. In fact, over 95% of our work comes from word-of-mouth referrals from satisfied customers! All of our work is fully guaranteed, and we stand behind everything we do! We offer many different types of door services including sliding glass doors, security doors, screen doors, decorative doors and much more. We provide same day service.

To ensure comply with building codes and safety regulations

Pedestrian doors, also called man doors and automatic doors, are an essential part of keeping the public safe from potential mishaps when entering your business. Your liability insurance can be affected by not having proper safety exits in place. In addition, the Americans with Disabilities Act (ADA) may require you to install them if a person in a wheelchair requests them for access to public areas.

The bottom line is that pedestrian doors provide easy access to and from a property without obstructing the main entrance. In addition to being 100 percent compliant with building codes and safety regulations, they have other benefits as well.

In some cases, a pedestrian door can double as an emergency exit. In others, it can be used by employees as a convenient way to enter or exit a property during inclement weather. Because they are typically located at the rear of a commercial, industrial, or institutional property, they can even protect against vandalism and trespassing.

Hawkeye Exit and Security has been servicing the greater Houston City area for over twenty years. Serving both commercial and residential properties, we specialize in providing a full range of services from new construction to remodels and everything in between. We offer free estimates on all new projects and monthly specials on maintenance of existing facilities.


The main purpose of safety features is to reduce the chance of injury or damage in case of an accident. Safety features also aim to make products safer even when they are used correctly. For example, many electronic appliances have a thermal fuse or circuit breaker, which automatically stops power from flowing if overheating occurs.

This safety feature protects the appliance from overheating and fire when used correctly and prevents overheating and fire even when used incorrectly (that is, by leaving something inside it that causes it to overheat). An effective safety feature is one that will work in all circumstances where its use would prevent an accident or injury. If a product has a safety feature and someone still gets hurt, either the product was defective or the safety feature failed to work properly.

When it comes to safety, pedestrian doors are a necessity. In fact, they’re required by local building codes and safety regulations because they allow employees and visitors to exit a building quickly in case of an emergency. When you have a pedestrian door, you can also keep a fire extinguisher nearby for quick access during a fire.

The most important features are finger-operated locks. These will keep people out of your buildings unless they are authorized to get in. Another advantage of finger-operated locks is their ability to limit the amount of time the door will remain open after it is activated. This can be crucial in areas where there are high levels of activity, such as a warehouse or loading dock area.

This feature may be more important than you think, since some thieves use automatic doors to get into commercial properties that have been left unlocked on the inside. Another feature that enhances the safety of pedestrian doors is one that allows doors to automatically close if an obstruction is detected in front of them. This can be very beneficial when used with the finger-operated lock feature mentioned above.

Pedestrian doors must also meet building codes and regulations if they are to be legally used on a commercial property. This means that even if you would prefer not to use pedestrian doors for your facility, you may have no choice. Given their importance, it’s vital that these doors are installed correctly, so it’s worth getting a professional involved to ensure you get everything right.

One of the most common questions we get asked is ‘what is the difference between a fire door and a blast door?’ Fire doors are rated for use in buildings that aren’t subject to blast loads, while blast doors are used in areas where explosive blasts may occur. While there are exceptions to this rule, this basic distinction provides a good foundation for choosing the appropriate type of door for your project.

It’s also worth remembering that not all automatic pedestrian doors are created equal. Some offer the same degree of safety as manual swing doors while others provide additional features such as access control or biometric scanning. It’s important that you know what options are available before deciding on your preferred system. Of course, you also need to consider the aesthetics of the building before choosing an automatic sliding door over one with traditional swing arms.

The manual swing option is an essential safety feature that must be included with every automatic pedestrian door. It allows personnel to manually open and close the door if the power or signal to the automated system fails, as well as to manually unlock the door in case of an emergency such as a fire.

Various types of manual swing options are available; choosing the right one requires careful consideration to ensure it works seamlessly with your automated swinging door.

The code also requires that pedestrian doors be inspected on a regular basis, particularly after installation. The inspection checklist should include the following features:

  • Check all bolts or screws are secured and tightened to the required torque specification. This will ensure the door is properly fixed in place and won’t loosen over time, which could lead to accidents.
  • Make sure the door closes properly, there is no excessive play between the door and frame, including any side panels, and that the door swings freely without sticking or jamming.
  • Ensure that all exit devices (e.g., panic exit hardware) work correctly without obstructing the door swing path.
  • Make sure all hardware (handles, hinges, locks) are aligned correctly and function as they should do without obstruction or obstruction of the path of egress for personnel who use wheelchairs or other mobility aids.
  • Check for signs of damage or wear on hinges or locks that could compromise safety precautions.

Determine the correct door for the application

There are two types of pedestrian doors: automatic and manual. Automatic doors have a power-assist feature, while manual doors require hand-held operation. In addition, there are different designs for each type of door, such as swing-out or slide-up. Automatic doors have a power-assist feature, while manual doors require hand-held operation. In addition, there are different designs for each type of door, such as swing-out or slide-up.

After choosing your building type and size, take a look at the available options under “Building Options.” These options include the opening type (manual or automatic), the decking material (wood or steel), and the gate type (swing gates or sliding gates). To ensure compliance with building codes and safety regulations, the following must be considered during the design phase of a pedestrian door installation:

The site of the door must be kept clear of any obstructions that could endanger occupants if the door were to open quickly. As stated in NFPA 101, "Fire Doors and Fire Windows," an emergency exit device should be located on every exterior side of every fire door or within 45 inches (114 cm) horizontally from each hinged side of each fire door. The emergency exit device should be readily operable by a single motion to release the latch.

Codes and standards are intended to ensure that our buildings are safe, energy-efficient, and accessible. The 2008 International Building Code (IBC) is the most widely used model building code in the U.S. It’s updated every three years by the International Code Council (ICC) and is then enacted into law by state or city governments.

The type of door you opt for will depend on the nature of your facility and the specific needs of the space. If you have a warehouse or factory, for example, you may benefit from a rolling door that offers excellent protection against theft and weather damage. If you run an office building or school, on the other hand, a sliding door is likely to be more suitable. To find out which type of pedestrian door is most appropriate for your facility, consult with an expert from door and dock solutions in Houston today.

Before making a purchase

It's always best to consult with an experienced professional. For example, an automatic door will work even if the power is out, but you need to make sure that some other safety features are in place.

The first thing to consider is that some doors are equipped with manual releases. This kind of door is designed to remain closed until someone on the outside physically pushes it open. This feature helps ensure that employees can evacuate quickly in case of emergency.

Another consideration is whether the door has a manual lift bar. Most doors have this option, which allows for ventilation even if the power is out. If yours doesn't have one, you may need to install one.

It's also important to assess your building's airflow and lighting situation before purchasing a new door. All automatic doors are mandated by OSHA to have at least 18 inches of headroom during operation. Plus, the door must have an unobstructed view into the space being accessed otherwise, someone exiting could trip or run into something inside.

Whether the door should be motorized or manual?

  • How will the door open and whether it will swing in or out?
  • How much clearance should be left for the door to open?
  • The degree to which the door seals should meet fire and security codes?
  • Whether the doors should be equipped with panic hardware?

If you’re looking for a single pedestrian door, you can choose from a number of options. There are swing-in and swing-out doors, as well as automatic and manual versions of these types. You can also select between high-pressure and low-pressure doors and chambers, and the type of seal that comes with each option. If you require more than one door, it’s important to take measurements to make sure they are properly aligned. This is especially true if your facility requires multiple types of doors in different locations.

Size and weight of doors

It’s important to choose a door with a size and weight that’s compatible with a building’s structure. For example, light gauge steel doors work well in low-traffic areas like schools, while fire doors are required in public spaces like hospitals.

Unlike the structural components that support them, pedestrian doors should be lightweight enough to allow easy mobility. This is especially important for installing interior swing doors because they will need to be moved regularly to make way for access by equipment like cleaning carts, forklifts, and pallet jacks.

Door tracking components

Tracking components are used to guide the door in one direction or another. When choosing door options, it’s important to consider the different types of track systems available for meeting specific needs. For instance, ball-bearing tracks offer quiet operation while roller tracks are more affordable than other options.

Depending on your facility’s needs, you may also want to consider other components that come into play when sliding or swinging doors are opened or closed. You can choose from hardware options like sliding door rollers and door closers, while swing doors require door hinges for secure movement.

Where will the door be installed?

When you’re choosing a door, it’s important to consider where it will be located and what it needs to do. Doors that will be used outside or in high moisture areas should be made from stronger materials such as anodized aluminum and stainless steel. Lighter-weight products such as glass and wood can also withstand brutal weather conditions but may require more maintenance. For indoor spaces, your needs will largely depend on whether the door is for a commercial or residential setting. In a commercial space, a heavy-duty option with advanced security features is a must. In a residential space, you may want to opt for a more decorative option that blends seamlessly with your business’ decor.


Are you trying to increase security? Improve energy efficiency? Make it easier for people with disabilities to access facilities?


Accessibility is more than just the ability to open the door. It also requires that the door be wide enough for wheelchairs to pass through and that there be no physical obstacle like a wall or stairs in the way. If Either of these things is true, the door might not be accessible. Accessibility is also often an important factor in product choice. It’s important to consider factors like door width, automatic doors and maneuverability when designing buildings, especially for businesses that deal with customers on a regular basis. But even then, accessibility can present its own challenges. Some users might require manual operation while others might prefer automatic doors.

For example, people who have trouble seeing or who are carrying heavy objects might prefer manual doors because they offer more control over how quickly they open and shut. On the other hand, automatic doors are great for people with limited mobility or anyone who needs quick access. If you’re dealing with a particularly large building or one that needs to accommodate many different types of users at once, you might even want to consider installing both manual and automatic doors depending on the needs of your patrons.


  • Does your budget allow you to buy or rent a certain product?
  • Do you want to consider financing options and available rebates and incentives?
  • Quality: What is the life expectancy of the door? How will it hold up to daily use and abuse?
  • Energy Performance: What kind of insulation is the door made out of, and how does this affect energy costs?
  • Aesthetics: does the door fit in with the look of your building's exterior and interior spaces?
  • Door Type: Should you opt for sliding or swinging doors, or do you need both options for different areas of your building?
  • Installation Process: Do you have experience installing doors, or would you prefer to have professionals do the job for you?

These are just a handful of factors that should be considered before choosing a door solution that works for your facility.

When it comes to choosing the right product, there are many things to consider. Cost is one obvious factor. For businesses, this might also mean considering factors like projected return on investment or the ability to reduce operating costs in the long term. However, these considerations can be difficult to weigh against each other. What if you need more of a particular product right away but it will be cheaper in the long run?


As a business owner, it’s your chief concern to make sure that all of your staff and customers can exit your building safely in an emergency. An automatic door with a manual override will allow people to exit in the event of a problem with the operation of the motor. A fire-resistant door will protect the occupants in case of a fire, while an insulated door will help maintain an even temperature in your business.

The same goes for the staircase. If you have a staircase that serves as an emergency exit, it has to be equipped with specific features to ensure safe and swift evacuation is possible in case of an emergency. For example, it's important to consider that a concrete or brick staircase will continue to be able to support the weight of people in the event of a fire, whereas wooden stairs can collapse when exposed to fire.

A manual door has a lower cost but is less convenient. If not properly trained, it requires an extra effort to operate during an emergency. An automatic door is more expensive but it’s easier to use in case of fire or power outage. Some doors have been installed with backup battery systems that allow them to be opened even during a power outage.

However, there are other safety features that must be taken into account when choosing the right door. It’s important for doors to have a strong seal to minimize smoke and heat from entering your home and for frames made of steel because they help prevent the spread of flames. Also, the door should have a self-closing mechanism for added protection from fire and smoke infiltration. In addition, if you need to exit through your front door in the event of an emergency, make sure that it opens in the correct direction by installing a door that opens towards the street or away from the street in case of a fire.


Functionality is a basic principle of design. It is essential that the hardware on the building provides adequate protection for the building environment. This is accomplished by using materials that are resistant to damage, weathering, mechanical stress, chemicals, etc. These concerns are of particular importance in industrial facilities because equipment, hazardous products and chemicals are used on an ongoing basis for production or manufacturing purposes. The hardware must be able to withstand constant use and remain safe for employees and visitors to the facility.

Hollow metal doors are ideal for industrial settings because they can be made with a variety of different features that meet specific needs based on the products being manufactured. The door can be made with a high-density core that is strong enough to withstand impact from forklifts or other heavy machinery that may pass through the entryway regularly. The door can also be made with materials that are resistant to harsh chemicals or acids used in industrial processes, which would otherwise eat away at the surface of traditional wood or metal doors.

There are a number of different automatic door options available on the market. For example, some are operated by an infrared beam that detects when pedestrians are near so that they can open or close automatically. This type of automatic door is particularly convenient for businesses with frequent pedestrian traffic, such as restaurants or shopping centers.

For commercial and institutional settings with large numbers of people and vehicles in and out, however, it's important to choose doors that can stand up to constant use and abuse. For example, if employees use automatic doors every day to get in and out of the building, you'll want ones that can withstand constant opening and closing throughout the workday; this is especially important if you're dealing with a lot of heavy equipment such as forklifts. On the other hand, if you're looking for a way to improve security at your facility keeping outsiders from entering your business or accessing sensitive areas you'll want to invest in heavy-duty automatic doors that can withstand forced entry.

Energy efficiency

In addition to their obvious convenience, automatic doors help to cut energy costs. In a building where automatic doors are installed; you can expect a 10% decrease in energy consumption. This is achieved through the reduction of the amount of time people spend waiting to enter or exit. Automatic doors also help to speed up the flow of people within a building, which makes for more efficiency and better productivity of employees.

Nuisance versus safety

The closure of an automatic door helps prevent accidents by slowing down the door's movement, but it also creates a nuisance when the door keeps opening and closing repeatedly. The purpose of nuisance features is to reduce or eliminate any problems caused by something that was originally designed to create safety. The closer is an example of a nuisance feature because it was designed for safety but now causes problems because of the repeated opening and closing, which can be annoying for employees who have to walk through that area frequently throughout the day.

Sometimes nuisance features are added intentionally to protect against lawsuits. It may seem counter-productive to add features that are bothersome in order to protect against lawsuits, but the key difference between nuisance features and safety features is whether they were designed with protection in mind

What is your door made of?

Many pedestrian doors are constructed from metal, such as steel. Others feature aluminum or stainless-steel frames and plastic panels, and may be coated with materials like zinc and urethane. Still others consist of reinforced glass or polycarbonate, and may even be tinted to reduce glare. If you're in the market for a wall-mounted entrance, look for aluminum doors that feature pivoting hardware and brackets.

To fit the needs of your facility, the door must be durable and secure. It will also need to stand up to high traffic volumes year after year without showing signs of wear and tear. A dependable product will give you peace of mind when it comes to its functionality and longevity.

Does your door have a lock?

Pedestrian doors can come with a variety of locking mechanisms, including keyed locks, card readers, and digital controls. By allowing you to control access to a space, these features can help your facility run more smoothly while also ensuring the safety of visitors and employees. Depending on the level of security you require, a high-security lock may be an ideal choice for keeping out intruders.

Door types

There are three primary types of pedestrian doors: swing, slide, and revolving. Each has its own unique benefits and limitations. Swing doors, for example, open in a traditional manner and can be used for both interior and exterior spaces. Sliding doors, on the other hand, operate in a similar fashion to garage or retractable door systems. Because they open via a track and roll along the ground, they’re best suited for top-to-bottom access like in a loading dock setting. Revolving doors offer the highest level of security and privacy but are generally only effective in indoor settings. Among other things, your team will identify your facility’s needs and recommend the right door type to get the job done.

In order for your new door to be installed properly, your contractor will need to know of any potential obstacles or structural limitations, such as a load-bearing wall. Your contractor will also walk you through the selection process. You’ll be able to choose from a wide range of hardware, colors and designs that will complement your business architecture and personalize your space.

Some considerations

  • Making sure there is enough clearance on the sides and top of your doorway for the door you want to install.
  • Having a professional measure the distance between the door frames on either side of the entryway to ensure they aren't too far apart or too close together for an automatic model to operate properly.
  • Knowing if you have any water pipes stored inside the walls so they can be moved out of the way if needed.

A professional door installation company will meet your needs in any type of establishment, from restaurants and retail stores to medical facilities and educational buildings. The average person can install a new door on their own, but a do-it-yourself job is likely to result in a poorly fitted or improperly functioning door that could compromise the safety of customers and employees alike.

Ensure all components are installed properly

The door is the main entrance to a building, and its security and condition reflect directly on the property and the people who live or work there. A worn or damaged door can mean a higher risk of break-ins and theft, as well as an increased cost for repairs, not to mention the possibility of injury.

There are many different kinds of doors on the market today: fire doors, steel doors, glass doors, and solid wood doors among them. All of these require different levels of maintenance and care. Even if you know you need a new door, it's easy to end up with one that's less secure than you expected. That's why you need a reputable installer to guide you through your options and ensure that your door is installed properly.

Improper installation can lead to the premature wear of parts and cause malfunctions that leave a building vulnerable to break-ins and weather damage. The consequences can be much more costly than investing in professional installation. The quality of installation can make or break a commercial building's security.

Automatic doors are the most common entry point for burglars, who use them to gain access to businesses. The consequences can be much more costly than investing in professional installation services. Here are just some of the vital components that an expert will ensure are correctly installed.

A door has to do more than just open and close; it must seal out water, wind, dust, pollen, insects, animals (like squirrels) . This requires threshold seals that prevent water from coming into contact with the floor or carpeting. And for this reason, among others, automatic doors require much more complicated installation procedures than do manual doors. Automatic doors are required by law to sense when they are obstructed by people or large animals (like horses) so that they don't crash into them or crush them in their tracks.

Before installing an automatic door, a professional verifies that the location meets the manufacturer's strict specifications. An expert also performs tests to ensure that the weather-seal is working correctly. For example, in cold climates, doors need to be tested to check for drafts. If the weather-seal is not installed correctly, components like the sensors can freeze and malfunction when exposed to extreme temperatures.

The door's opening mechanism is the most important component of all. Without it, the door can't function. A poorly installed door jam will leave the bottom of the door vulnerable to water damage. A bent or broken threshold can cause uneven openings, which can lead to misalignment of the door's moving components and premature wear on important pieces like rollers.

Test the door's proper operation: A professionally installed door will open and close smoothly, without any squeaking or grinding noises. It will have an even gap around the perimeter, with no gaps between the frame and the floor or threshold where moisture can enter. Test all of these conditions to ensure you are getting a quality product that is properly installed. . For an automatic door, the installation of motion sensors, keypads, and other electrical components requires specialized tools and training.

What is the difference between a manual door closer and an automatic door closer?

The main difference is that they are used for two different types of doors. A manual door closer is used on a heavy, wooden or metal door that can be opened manually. It attaches to the hinge side of the door with screws or bolts, and its purpose is to slow down the speed at which the door closes, making it easier for someone walking behind the door to safely catch it before it slams shut.

The automatic door closer is used on glass doors, sliding glass doors, and sometimes even folding doors. It uses an electric sensor to detect when something has entered its path, and then halts the movement of the door so that it does not close on anyone's hands or fingers. A properly installed automatic door closer will prevent hands or fingers from being smashed in the moving glass. A manually operated wood or metal door will not have this safety feature.

There are two types of closers

which are differentiated by their location. As the name suggests, an interior closer is installed on the interior side of the door frame. An exterior closer is attached to the exterior side of the door frame. The main difference between them is that one closes from inside and one from outside.

The first type of mechanism is called a spring-loaded closer and it is installed on both sides of the doors as well as on top and bottom part of some doors as well as on top and bottom part of some doors. This type has a spring mechanism that pulls it back into its original position after it shuts the door.


What is the difference between a manual door closer and an automatic door closer?

The main difference is that they are used for two different types of doors. A manual door closer is used on a heavy, wooden or metal door that can be opened manually. It attaches to the hinge side of the door with screws or bolts, and its purpose is to slow down the speed at which the door closes, making it easier for someone walking behind the door to safely catch it before it slams shut.

The automatic door closure is used on glass doors, sliding glass doors, and sometimes even folding doors. It uses an electric sensor to detect when something has entered its path, and then halts the movement of the door so that it does not close on anyone's hands or fingers. A properly installed automatic door closer will prevent hands or fingers from being smashed in the moving glass. A manually operated wood or metal door will not have this safety feature.

Safety features

Safety features are present in every device that involves any degree of risk. The primary purpose of these safety features is to reduce injuries during foreseeable accidents. The primary purpose of a closure is to prevent injury when someone tries to manually shut the door. It must be correctly installed for this purpose; otherwise, it will cause injury during an accident.

For example, if the closer has been installed upside down, it will cause injury when the door slams shut due to strong winds. The victim may sue the manufacturer or installer of the closer for not installing it correctly. How does one prove that the closer was incorrectly installed? If it is positioned at least three inches away from the door, then there's no problem. The victim can recover damages from the installer because the manufacturer has already warned against improper installation.

Similarly, automatic doors must have sensors that halt its movement when a person or object enters its path. If the sensor malfunctions and fails to halt its movement, then it causes injury when an accident occurs such as when an adult enters its path with a toddler on her shoulders. In such a case, the parent will likely be able to sue for damages incurred by her child's serious injuries.

Lock set

Locks work on the principle of differential access: there needs to be some way for the good guys to get in and no way for the bad guys to get in. If there is any way for the bad guys to get in, then when they do, they can just break open whatever mechanism was used to keep them out in the first place. Lock manufacturers have therefore adopted a strategy of making sure that every door in your building meets minimum security standards.

There are many different types of door locks that are designed to protect your business. The most common lock is the pin tumbler lock. The pin tumbler lock is easy to install, but it's also easy to break into. That's why it's important to have a professional set up the locks in your building. A professional locksmith will be able to recommend the best type of lock based on your building's security needs, as well as properly install the lock. There are many options available for businesses, including electronic locks and smartcard locks.

Even if you have an effective lock installed by a professional today, there are many things that can go wrong over time. By having a regular maintenance schedule, you can ensure that your business stays secure long after the installation is complete. There are several types of deadbolts locks that professionals use regularly in their work. Review the following list so that you will know what type of deadbolt to request when hiring a professional:

Door Knobs with deadbolt. Door Knobs with deadbolts offer maximum protection against unwanted intruders and burglars. The right lock for your door is the one that is best-suited to its specific properties. There are many different types on the market, each with their strengths and weaknesses.

But all locks remain vulnerable to the same attacks: picking and bumping. Some of the most effective locks require a key to open from both sides. These are called double-cylinder locks and they're very secure. They're also more expensive than normal locks and more difficult for your tenants to use. For most residential buildings, it's probably more cost-effective to install locks that only require a key from one side of the door.

For example, some people feel that "bumping" is an easy way to get through a door without picking it. This is true if the lock doesn't require a key from both sides. However, there are some bump-proof locks available today that make this attack useless. You should always consult an expert on which kind of security measures would be best for your building and what type of lock would best serve these needs.


Weatherstripping and brush sweeps are among the most important and most often neglected building components. They serve the same function, to stop air and water from leaking in and around buildings. Weatherstrip is a door’s first line of defense against drafts, dust, insects, and other pests that can cause discomfort or damage to the building. Installing weatherstripping on doors that are already weathertight can prevent problems down the road.

If a door's brush sweep is installed upside down, it will not function correctly. Some obvious errors that can be easily avoided are installing the trim upside down or installing the trim in the wrong direction. Weatherstripping must be installed in a manner that prevents air leaks and drafts from infiltrating a building. The following information outlines proper installation of weather stripping by providing tips on the correct direction to install.

Weatherstrip prevents wind and water from entering a building through an opening at the top and bottom of a door or window to keep out insects and debris that can cause damage to the structure. It also keeps out drafts that can move through the structure, making it uncomfortable for building occupants.

Weatherstripping, also known as weather-sealing, is the process of creating an airtight seal around doors. It is accomplished with rubber or foam strips that are installed in between the door and the frame. These strips prevent air infiltration across the doorway.

Weatherstrip should be installed around the perimeter of exterior doors. The weatherstripping should create a seal at the threshold, preventing air infiltration and water entry. The weatherstripping should also act as a damper to minimize air infiltration between the door and the frame.

Weatherstripping for flush doors should be applied to the sides of the door, bottom of the door, and top of the door. Weatherstripping for recessed doors must be cut to fit the width of the gap between the door jamb and frame.

Weatherstripping can be made from many different materials including foam, rubber, or metal. For flush doors, foam or rubber are recommended; however, metal weatherstripping is recommended for recessed doors because it will not warp when moisture gets trapped behind it.


What's the threshold of a door? It's at the bottom of the door. The word "threshold" is also used metaphorically: for example, we talk about "crossing a threshold" and "being under the threshold". But in this case we're talking about an actual, physical thing: a part of a door or gate or sally port. The literal threshold of a door is the place where there is no floor. If you're inside and you open the door, you're on the threshold. If you walk outside and close the door behind you, you're still standing on the threshold.

When thinking about the design of a door, it is important to think about the threshold, or edges. The threshold of a door is an important aspect of its function. If the threshold is not properly maintained, it can cause problems for automatic doors. The threshold of the door should be solid, especially if carts and other material-handling equipment regularly passes over. For automatic doors, an uneven track or loose rollers can severely impede the door’s function.

For a doorway to function properly, it needs a threshold, or sill. The threshold of a doorway is essentially a border between two areas, one of which is above the level of the other. When you step on this border or pass through it, you are transitioning from one plane to another, and thus need something to hold onto to avoid falling. This is why thresholds are usually solid; they give you something to hold onto when you are changing planes.

Another important aspect of automatic doors is the track on which they travel. The tracks must be kept in good condition to ensure that the doors open and close efficiently. If there are any inconsistencies or obstacles in the tracks, then they will impede the door’s ability to move along the tracks smoothly.

The most important part of automatic doors are the rollers that are used to move them up and down on their tracks. If these are not kept in good repair then they will cause problems for both automatic sliding and hinged doors. Reviewing these three aspects is an effective way to keep your automatic doors functioning properly.

The problem with thresholds is that they can be uneven, and this makes automatic doors (and conventional doors) harder to open and close smoothly. Any gaps or holes in the threshold cause problems for automatic doors; the push-plate sensor cannot detect that the door is open. Slanted thresholds may cause automatic doors to stop before closing all the way. It’s easy and cheap to fill and level thresholds and doing so makes automatic doors work better.

As you can see, there are plenty of reasons why pedestrian doors are a must-have for your facility. And even though these features are often installed for safety purposes, pedestrian doors are also great for improving the look of your property. Call us today at [832]-232-9150 to schedule an appointment with one of our professionals.